Coloured decorative precast mortar for walls


Έγχρωμος σταμπωτός σοβάς για τοίχους

Qualities:
To TEMNON color plaster is precast concrete degraded in a suitable way contains concrete building materials,pigments,and special additives of new technology,suitable for the colouring and hardening of vertical concrete wall surfaces.It is provided in 18 shades and offers surfaces of high architectural beauty in combination with great mechanical resistance.they are not influenced by weather conditions and they have long life endurance.
Fields of applications:
it is suitable for the construction of coloured concrete walls,it’s applied in every surface like the common plaster,it is suitable not only for works in traditional settlements,respecting the qualities of the area as well as for works of modern design in complete accordance with the natural environment.
A)traditional settlements
B)malls
C)churches,museums
D)industrial buildings
Technical qualities:
Form:smooth concrete mortars
Shades:ANTIQUE WHITE,APRICOT,ADOBE BUFF,KARISTOS,HARVEST SAND,GOLDEN SAND,PEACH,CORAL,ATHITOS,SEA FOAM,GREEN,SLATE,SUN BUFF,TILE RED,TERRA COTTA,BRICK RED,PEWTER SUN,GRAY,(ANY PARTICULAR SHADES ARE POSSIBLE AFTER GIVING AN ORDER)
Demand in water:5kg/bag25kg
Resistant in compressive strain:3,50N/MM2
Resistance in bending:1,20N/MM2

Warning:
During the application the temperature must be between +5C to +35C
Ways of use:
The construction must be carried out by an approved or trained crew of Temnon.
Preparation of underlay:
The underlay  must be discharged of dust,oil,rotten material and be wet before Temnon color plaster is applied.If plaster has been double coated,it must be more or equally resistant to Temnon color plaster.According to the general directions of use,every previous coating must be better than the next.The underlay may be double coated or concrete or mansory surface.
Application:
Temnon color plaster is added in clear stirring water until plaster is created.The mixer that will be used must be clean to avoid the color become spoiled.Temnon color plaster is underlay by trowel or hawk or by blast nozzle 1/2,5cm thick(according to the mould used)Then the surface must be scrubbed by spongy float or a special trowel.The working time depends on the absorbency of the underlay and the environmental temperature.
Application of release liquid:
While the plaster is setting the dusting of release plaster or Temnon release liquid must take place to prevent the mould stick into the liquid plaster during the decorations,ending up shading the final surface.
Decoration using stamps:
After the dusting of Temnon Release or Temnon release liquid is decorated by the chosen mould.
Washing:
When the  Special release Tembon release is used after the maturing the wall is washed with hydrochloric acid to remove residue.
Sealing:
After the surface has dried it must be sealed with a special polish of high quality.Temnon Clear Seal(consumption 0,250kg/m2)to strike out absorbency.
Consumption:
25kg/m2 surfaceper 1,3/1,5cm thick.
Package:
bags of 25kgs
Storage:
At least 12 months from the production date in sealed bags,protected from humidity.